迪奥科技标语
How to maintain and clean industrial cameras
Author:Administrator   Published in:2019-09-05 18:42

Industrial cameras, as a core component of machine vision systems, are essentially the process of converting optical signals into electrical signals. A lot of dust will appear after a general industrial camera has been used for a long time. It has a great impact on the life and performance of the camera. Therefore, it is necessary to maintain and clean industrial cameras. Below, Dior industrial camera manufacturers to tell you how to maintain and clean industrial cameras.

  How to maintain industrial cameras?

  1. Try to avoid pointing the industrial camera directly to the sun, so as not to damage the image sensing device of the camera;

 

  2. When storing, store the camera in a clean, dry place.


industrial cameras

  3. Avoid touching the camera with substances such as oil, steam, water vapor, moisture and dust to avoid direct contact with water;

 

  4. Do not pull and twist the cable;

 

  5. If you don't need it, don't disassemble the camera at will, trying to touch the internal parts. This is easy to damage the industrial camera. It is considered that the damaged dealer is not guaranteed.

 

  6. Do not use a stimulating detergent or organic solvent to wipe the camera;

 

  How to clean industrial cameras?

  1. Electrostatic adsorption method The dust on the surface of the image sensor of an industrial camera is adsorbed by the soft bristles having static electricity. This method has the same advantages and disadvantages as the suction suction method. When selecting which method to use, it mainly depends on which tool is convenient to take.

 

  2. Fiber cleaning method: This is a method of using a soft microfiber material, which is stained with a functional cleaning solution and deepened inside the CCD for cleaning. The functional cleaning solution mentioned here is preferably pure alcohol with a concentration of more than 90%. Do not use isopropyl alcohol. Isopropyl alcohol can absorb the moisture in the air. It is easy to leave liquid marks on the surface of the industrial camera CCD during cleaning. Do not use methanol, which is a highly toxic substance. The advantage of this method is that it is non-invasive, easy to operate, clear and can be targeted, and has certain effects on oily dust. The disadvantage is that if this method is used improperly, it is more and more dirty and more counterproductive.


industrial cameras

  3. Suction suction method This method uses the suction of the vacuum pump to absorb the dust on the surface of the image sensor of the industrial camera. The working principle is the same as that of the vacuum cleaner used in our home. The advantage of this method is that it is non-contact vacuuming and does not damage the image sensor. The disadvantage is that this method only has a suction effect on dry floating dust, but it is not very effective for adhesion dust, oil stains, and the like.

 

  About how to maintain and clean the industrial camera, I will introduce it here. Industrial cameras as the "inspector" in the production to delivery, their own maintenance and maintenance must be done in place. The above is all from the author of Dior Technology, there may be no detailed information. If you have more doubts or need to purchase, you can call us.

 

Copyright @ 2016 - 2017 All 迪奥科技 版权所有 粤ICP备09101295号